Back to Blog
How-to Guides 2026-11-17 Optics Force 1 views

Atlas BT46-NC Bipod: No-Clamp Mounting Explained

Atlas BT46-NC Bipod: No-Clamp Mounting Explained

The BT46-NC ships without a clamp. Here is how its 1.100-inch two-hole pattern decides which mount you need, and how to plan a supported setup.

The BT46-NC is a bipod without a clamp, not a bipod without a mount

The "NC" in the PSR Atlas Bipod BT46-NC stands for No Clamp. Atlas builds this version for shooters who already own a mounting interface, so the money goes into the legs and body rather than a clamp you would remove. That makes the first step of any BT46-NC setup a measurement question, not a wrench question: your rifle needs a mount that matches the bipod's two-hole pattern.

Get that match right and the rest is straightforward. Get it wrong and you will be holding a well-made bipod that cannot attach to anything you own.

What the BT46-NC record confirms about mounting

  • BT46-NC PSR Atlas Bipod: Standard height No Clamp: The BT46-NC has a two hole pattern of 1.100" with the holes being 10/32 threads. This is the single number that decides whether a mount will work. Confirm your mount's hole spacing and thread size before ordering.
    BT46-NC PSR Atlas Bipod: Standard height No Clamp
    BT46-NC PSR Atlas Bipod: Standard height No Clamp
  • BT46-NC PSR Atlas Bipod: Standard height No Clamp: It requires any 17S size lever style mount, including the ADM-170-S, ARMS 17S, TRAMP from Badger Ordnance, LT271, or any ARCA dovetail mount with the same hole pattern. These are the confirmed mounting paths. Anything outside this list is unverified for the BT46-NC.
  • BT46-NC PSR Atlas Bipod: Standard height No Clamp: The BT46-NC will also mount directly to the BT19 AI Spigot or BT70 M-LOK Adapter. If you run an AI-style spigot or an M-LOK forend, you can skip the 17S lever mount entirely.
  • BT46-NC PSR Atlas Bipod: Standard height No Clamp: Includes two 10-32 x 3/8" flathead socket screws. The fasteners come in the box, so you only need the mount itself and the right driver.

A supported mounting sequence for the BT46-NC

The supplied record confirms the interface and the included hardware. It does not include a torque value, thread-locking guidance or a step-by-step procedure, so treat the following as a planning sequence and follow your mount maker's instructions for the fasteners.

  1. Identify your rifle's interface: Decide whether you are using a 17S size lever mount, an ARCA dovetail mount with the matching hole pattern, the BT19 AI Spigot or the BT70 M-LOK Adapter. Pick one path before you buy anything else.
  2. Verify the hole pattern and threads: The mount must accept a 1.100" two-hole pattern with 10/32 threads. A mount that looks similar but uses a different spacing will not take the included screws.
  3. Fit the mount to the rifle first: Install your chosen mount to the rifle or forend per that mount's own instructions. Doing this before joining the bipod keeps the work on a stable, unloaded platform.
  4. Attach the bipod with the supplied screws: Use the two included 10-32 x 3/8" flathead socket screws to join the BT46-NC to the mount. Confirm both seat fully and sit flush in the countersinks.
  5. Check function before you head out: Deploy the legs through the five positions and confirm the pan and cant behave as expected. The record lists preloaded pan and cant at 30 degrees each, so a small amount of movement is by design rather than a fault.

Choosing between a 17S lever mount and a direct adapter

Both routes are confirmed by the record, and the right one depends on what your rifle already has. A 17S size lever mount such as the ADM-170-S, ARMS 17S, TRAMP from Badger Ordnance or LT271 gives you a quick-detach interface and is the natural pick if your forend or rail already carries that footprint. It is also the more flexible option if you move the bipod between rifles that share the same interface.

The BT19 AI Spigot and BT70 M-LOK Adapter are direct routes. They suit shooters whose chassis or forend is built around those systems and who would rather not add a lever mount in between. If you already run an M-LOK forend, the BT70 is the shorter path to a working setup.

An ARCA dovetail mount is the third route, but only if it carries the same 1.100" two-hole pattern with 10/32 threads. ARCA is a broad family, so treat the hole pattern as the deciding check and the dovetail profile as secondary.

What you are attaching: height, weight and construction

Adjustability details that shape the setup

  • Five leg positions: The record lists leg positions of 0, 45, 90, 135 and 180 degrees, so you can set the legs splayed, vertical or folded along the body.
  • Preloaded pan and cant: Both are listed at 30 degrees. That gives you movement on uneven ground without a loose, uncontrolled head.
  • Fore and aft pivot limiting bosses: These constrain fore and aft movement, which matters when you load the bipod against a rest.
  • 0.5" position button: A larger button diameter is easier to find with a gloved hand when you are changing leg positions in the field.
  • Footprint of 8–11": Worth checking against the width of your shooting mat or hide, and against how much forend space your mount consumes.

Where the supplied information stops and your judgment starts

The record is clear on the interface, the hardware, the dimensions and the materials. It does not supply a torque specification for the 10-32 screws, thread-locking guidance, or a manufacturer installation procedure for the BT46-NC itself. Rather than guess, use the instructions that come with your chosen mount and the standard practice your rifle builder recommends.

The record also does not confirm compatibility with mounting systems beyond the ones named. If you are considering a mount that is not a 17S size lever style, not an ARCA dovetail with the matching hole pattern, and not the BT19 or BT70, treat it as unverified until you confirm the 1.100" spacing and 10/32 threads yourself.

One background note worth knowing: the PSR series was developed for the SOCOM PSR weapons system, and the BT46-LW17 was the variant selected for that program. The BT46-NC is the same family without the clamp, which is why the mount question dominates the buying decision. At a catalog price of USD 185.57 against a comparison price of USD 289.95, the saving only pays off if you already have, or plan to buy, a compatible mount.

Related Articles

Customer Service
Home
Products
Cart
Profile